Saturday, October 13, 2012

Sewing Machine Repairs You Can Do DIY

A sewing machine usually has a 25-year warranty on the head, but that doesn't cover everything that can go wrong. A sewing machine is relatively simple (if it's not a new electronic one) and you can probably repair and do the maintenance work yourself. We purchased our Kenmore sewing machine in 1974 for $200 new. It's on its second 25 years now, out of warranty and relying on our ability to keep it operating.

If all that's standing between you and sewing is that your machine doesn't work, it's time to take a look at it. You can troubleshoot your sewing machine and repair almost anything that keeps it from sewing. If your stitches are less than stellar because the sewing machine doesn't cooperate, check the basics:  bobbin, needle, thread and tension.
Here's how to make repairs and keep your sewing machine operating.

Start by unplugging your sewing machine. 

Bobbin
Your bobbin is either horizontal or vertical, and it is located under the feed dogs where the needle goes down. Remove the plate that covers the bobbin, remove the bobbin and clean everything in the bobbin area with a dry toothbrush. You need to remove all lint, fuzz and threads from the bobbin area and under the feed dogs. It doesn't take much lint to mess with the stitching and it's probably the most common problem with most sewing machines. You don't want to pay someone to clean this when you can do it yourself.

If your bobbin is uneven, too full or not filled with similar thread as the top thread, you may have loose threads and skipped stitches. Use a bobbin wound evenly with the same thread as the top. Also, cut the starting thread close so it doesn't hang out of the side hole. Assemble the bobbin by the instructions in your manual. You probably need to pull the thread through a slide that is the bobbin tension and listen for it to click into place. Once you have it right, you'll open the lever on the bobbin cover to insert it into place. This keeps the bobbin from falling out of the cover while you're working.

When you wind a bobbin, you loosen the little wheel on the big wheel. Don't forget to tighten the little wheel again. This common error may make you think your machine is broken. This repair takes the repairman ten seconds and costs you a minimum repair fee. 

Needle
Use the thumb screw to remove the needle. Check to see how it's installed -- the flat side usually faces the thumb screw, but check so you'll get it right. Change to a new needle. If your needle has a burr or is even slightly bent, your sewing machine will notice before you do. Don't trust your eyes on this -- just do it. It might save you repair expense. 

Thread
Use the manual to thread the sewing machine if you're having a problem. It may show you something you're doing wrong, a skipped guide or even threading the needle from the wrong side. The general idea is to place the thread on the spool holder and run the thread from behind to the first guide. You loop down around the tension guide and back up to the guide that moves up and down when you sew. Thread the guides down the side of the machine to the needle and thread the needle. Most of these machines call for threading the needle from the left or from front to back. Once you have a bobbin in the machine and thread from spool holder through the needle, you can turn the machine on to check the tension. 

Tension
If the sewing machine tension isn't correct, you'll have loops on one side of the fabric, skips in the stitches, or a thread that runs on the top or bottom of the fabric that pulls out easily. The sewing machine tension is regulated by a dial on the front of most machines, and experimentation is the best way to determine the correct adjustment.

The bobbin also has a tension adjustment that is a little screw on the cover. If you can't get the tension correct by adjusting the dial on the front, open the sole plate and remove the bobbin in the cover. Use a tiny screwdriver -- you probably got one with the sewing machine -- or a paperclip to loosen the tension. Remember lefty loosey and righty tighty when adjusting the tension screw.

Place a piece of fabric under the needle, close the presser foot and sew a few stitches.  Remove the fabric and check the stitching on each side. Pull on the fabric and see whether the top thread or the bottom thread breaks first. If neither breaks, you've got the tension right. 

General Issues

Oil
If your sewing machine sounds like rocks in a tin can, it probably needs oil. Unplug it and oil with sewing machine oil ONLY using the manual to locate the oil ports. Plug it back in and use some old fabric to test it and remove any oil drips. 

Manual
You no longer have a manual for your sewing machine? You can get all the information you need online. Check the brand website first, then look for helpful sites that have the scanned manuals available. I've never seen one I couldn't locate for free. A recent search for a newer Singer Simple directed me to WalMart and an excellent video for threading this new sewing machine. 

Feed Dogs
The feed dogs move the fabric through the needle path. If the feed dogs are lowered, your sewing machine won't move the fabric. Quilters and crafters lower the feed dogs to freestyle stitch, but if your sewing machine won't move the fabric, you need to check the owner's manual to see where the button or knob is to raise the feed dogs. It's usually on the base of the machine on the right side. 

Presser Foot
You probably have different presser feet attachments with your machine. You need a presser foot that has a horizontal opening if you use a zigzag stitch. A presser foot that has only a small hole works great for straight stitching with a straight needle, but if you change stitches often, it's a great opportunity for you to break a needle. Use a zigzag presser foot and avoid the danger. The tip of a broken needle may get under the feed dogs and waste your sewing time while you try to figure out why your machine won't work.

If you've been through all these procedures, your sewing machine should spin like a top. If it doesn't, review the manual or ask a friend who sews. Take your machine to a repairman as a last resort. We're always into saving money. We have published the Retirement Living Guide Tips and Recipes for Easy Cooking on Smashwords. You can read a large sample for free: http://www.smashwords.com/books/view/125177 

Get ready to make Halloween costumes and Christmas gifts now that the weather is changing and you'll be indoors.

Linda
cajunC 

HHGWPD4NM8N4
WPA73FW9BVAA

Thursday, October 4, 2012

Easy Halloween Costumes for Any Age

Easy Halloween Costumes for Any Age Create Your Own
Costumes don't take much sewing or time and you can make something original with little effort.
Fruits and vegetables are easy costumes to make for children. Choose a fabric the color of the fruit or vegetable you want to represent. You'll need fabric the width of the child from elbow to elbow when elbows are extended. It needs to be twice the length from neckline to knees, or longer if you want to make a cucumber or a zucchini squash.
fruit vegetable halloween costume DIY
Fold Fabric in Half with Fold at the Bottom

Fold the fabric in half, wrong side out and stitch the sides, leaving room for arms starting about 5 inches down from the top. Stitch around the top by folding down 1/2 inch, then 2 inches. Stitch close to the edge and leave about 1 1/2 inches unstitched so you can run a string through the casing you've created. Stitch again about 1 inch from the top to create a ruffle. Run a heavy cord or ribbon through the casing by using a large safety pin or a bodkin to gather at the neckline when you're ready to try the Halloween costume for size.

Cut two holes out of the bottom fold for legs. Stitch around the leg holes and armholes if you want to keep it from fraying. 
Make a "bag" to wear for costume
Sew Sides, Fold Top and Stitch Two Rows for Casing
Turn the costume right side out and try it on your child. Have her step into the sack. Stuff it with newspapers or similar stuffing to create an apple, a tomato, an orange or whatever fruit or vegetable you want. Pull the gathers around the neck and see if you need to make adjustments.

Make a matching hat for your fruit or vegetable costume with a grocery bag large enough to fit on the child's head or a piece of fabric. You can make it square or like a beanie. Add two leaves for an apple, the pointy little "leaves" at the top of the tomato, or a "navel" for the orange. Your child could also be an eggplant or a cucumber with a little skinnying to the costume. Have a great Halloween experience, enjoy the kids and stay safe.  Linda cajunC

 WPA73FW9BVAA


Make a hat to complete the costume
Add a Paper or Fabric Hat for the Costume





Sunday, August 19, 2012

Create Cross-Stitch Alphabets With Silk Ribbon Embroidery Embellishments


correcting cross stitch alphabets
Alphabet Letters Sometimes Look Like Spacing Is Incorrect
The smooth look and simplicity of counted cross-stitch work on the fabric is part of the appeal, but cross-stitch can be too plain, particularly with alphabets. That's when you need a fancy cross-stitch alphabet or maybe need to try something different.

With some alphabets, when you put letters together counting spaces between them, they just don't look right. That's because the eye is drawn to the mixture of diagonals with vertical lines. The diagonal "A" in the alphabet I'm using here makes it look as if the distance between the letters isn't the same. It is.

You can mix cross-stitch with ribbon embroidery to improve the look of a plain cross-stitch name. You may also be able to overcome an error you've made if you've miscounted. Instead of taking your work out and starting over, try something that may even improve the look.
add ribbon embroidery stitches to cross stitch alphabets
Silk Ribbon Embroidery Adds Color and Interest

Here's one I've been playing with in an attempt to see how silk embroidery works on Aida cloth. It's pretty easy to do, and with a little more work, this might be usable.

We have some cross-stitch alphabet books for sale if you want to try your luck at this. You might find an alphabet with flowers that you can change from cross-stitch to silk ribbon embroidery stitches. I'm always experimenting with needlework crafts to create one-of-a-kind items. Mixing cross-stitch with silk ribbon embroidery seems as if it could be interesting.

See you soon!

Linda
cajunC


Monday, July 23, 2012

Using Border Prints for Quilts and Pillows



Using Border Prints for Quilts and Pillows

border prints make interesting quilt blocks
Use Border Prints for Interesting Quilt Blocks


Some fabrics have strips of design elements throughout the fabric and some have the strip at one or both ends. These fabrics make beautiful skirts, and Daisy Kingdom cornered the market on little girls’ dress fabrics several years ago. If you have any border prints, consider using them for quilting or for making pillows. 



 
Check the print by tearing it along the edge of a border design. You want to see if the printing is straight on the fabric. Surprisingly, most border prints are accurate. That’s not true for all printed fabrics, and it’s important for quilting or piecing that the fabric is printed straight with the fabric threads to avoid visible errors.

Border prints make strips for quilting projects
Tear Border Strips to Make Certain They are Printed Straight


Select contrasting fabrics, and plan a design or find a pattern you like. You’ll need a design that uses strips of fabric, not circles or wedges. Log cabin style designs are ideal, and you can make your own design by starting with a center square in the size you want to work with. I use at least 2 1/2 inches for center squares, and that makes a 2 inch finished center. If your border print is 2 1/2 inches, it will look like you did some careful planning. Make some fabric strips to start -- a light color if your border print is dark or a dark color if your border print is light. It doesn’t have to be a solid color -- try small prints or monochromatic designs. 

Add the Border Print Around the Edge
Start with a Center Square and Add a Square on Each Side


Add a block on each side of the center block. It will be the same size as the center. Using one of your long strips of fabric, add a strip on each side of the three blocks and cut off at the end so it’s even with the 3-block square. Your design will now be a center square with a square around it. It’s time to try your border print that you’ve cut into a strip. Add that strip next and cut at the end or let it extend beyond the edge by the size of the border. In other words, if your border print is 2 1/2 inches wide, leave 2 1/2 inches on one end before you start to sew the strip to the block. You can make two long sides and two short ones or you can make all four sides the same. Border prints seem to do better with two short sides and two long ones. Add another strip beyond the border print if you want large quilt blocks for a pillow or a quilt. 

Using border prints adds interest to the quilt block
Use the Border Print Twice to Make a Large Block




 Needlework: HHGWPD4NM8N4 Technorati

Thursday, June 21, 2012

Improving Applique Techniques -- Thin Fabrics, Blind Stitch, Whip Stitch and Machine Stitch

Improving Applique Techniques -- You Can Create Quality Quilting or Crafts Applique


Appliqué pillows, quilt blocks or craft pieces available for purchase at crafts fairs and thrift stores are sometimes inferior quality. The crafter has done a nice job, but has used fabrics or techniques that make the work look less than professional. Here’s a blue background with white flower petals and a yellow center. The crafter has spent hours on the handwork, but it has several “issues” that you’ll want to avoid. 

Appliqué of a flower on blue background. White petals show through yellow center.
Thin Fabric Affects the Appearance

Fabric Too Thin


When you’re choosing fabrics to appliqué, pick heavy cottons or fabrics that won’t show the background through. If the crafter had used the blue for petals on a white background, the design would be more attractive. The white wouldn’t show through the blue petals the same way the blue background shows through the white petals. Then, there’s the center. The yellow fabric is polyester and cotton, too thin for the appliqué. As a result, the white petal parts show through the yellow center. 

REMEDY: You can speed up your appliqué process and keep the background from showing through by using double layers of fabric for the petals. Cut two of each and match fabric front to fabric front. Stitch around the petal, leaving an opening for turning. The easy way to stitch this is with the sewing machine. Turn the petal and press around the edge. Attach the doubled fabric petal in place and whip stitch, blind stitch or machine stitch in place. You don’t have to turn edges as you go, you have a double layer of fabric and your finished product looks professional.

Double applique technique with lace edge used for pocket here
Double Fabric Applique with Lace Edge
Double applique with lace edge easy to make and attach
Sew Applique Right Sides Together and Turn
Another “fix” for the yellow center that shows background fabric through like this is to use batting to “stuff” it like you would for a biscuit quilt. Open one edge and use a knitting needle to push the batting into the center. Once you make a puffy center, you’ve covered the background fabric as well as made your appliqué look 3-dimensional.

Use Blind Stitch for Whip Stitch


Whipstitch is an acceptable stitch for appliqué, but the blind stitch is more attractive. 

applique techniques blind stitch for attaching applique
Blind Stitch Doesn't Show Like Whipstitch
REMEDY: If you aren’t familiar with the blind stitch, you can learn it in a jiffy and use it for your next appliqué. With an appliqué placed on the background fabric, start the blind stitch by pulling the threaded needle through the appliqué edge at the fold. Take a tiny stitch to anchor the thread, and another tiny stitch to catch the back fabric. Bring the needle through the back fabric and slide it through the folded edge of the appliqué for about 1/4 inch. Catch the background fabric again and bring the needle forward to the appliqué, slide it through the folded edge, and you’re making fast tracks with the blind stitch.

Alternative Stitches


sewing machine zigzag stitch for applique
Machine ZigZag Works for Applique, Too
If you want to machine stitch your appliqué, you can work with a small zigzag stitch. This Dresden plate block shows how easy it is to use the sewing machine to finish the edge of the appliqué. This one doesn’t have the edge turned under before zigzagging. It lies flat and is easy to sew, but after many washings, the fabric will fray along the edge. If you want to make your appliqué last, double fabric and turn as discussed or turn all raw edges under before stitching.

Quilting and Applique


You don’t have to be a perfectionist to have fun crafting, but you’ll want to avoid major goofs. Polyester and cotton fabrics are often too thin for appliqué or other quilting projects because the seams show through. One-hundred percent cotton has been the choice of quilters for years because it looks best and it’s easier to quilt. That brings us to another way you can improve your quilting and appliqué. Don’t use polyester and cotton sheeting fabric for anything to do with your crafts. It’s very difficult to quilt or hand-sew sheeting fabric I learned in high school. I took two sheets and made a coverlet for a 4-H project, with a diamond design overall. It was some of the most difficult handwork I’ve ever done. It wasn’t worth it, even for a blue ribbon -- but once I had it started, I couldn’t start over. Learn from my mistakes.

See you soon!
Linda